User Manual
ShureWirelesswithYamahaCL/QL
www.yamahaproaudio.com
15
disabling “IGMP Snooping” has the potential to restrict other aspects of the
network’s performance. Consult with a network specialist before proceeding.
Yamaha SWP1 switches are known to work correctly with their “DANTE
CONFIG” enabled. Use these for a more stable and reliable experience.
They include the “IGMP Snooping” function which is automatically setup by
default, as well as providing some additional useful network monitoring tools.
Yamaha SWP1 range of Network Switches
If the Shure wireless receiver is discovered by CL/QL, but is not controllable:
Check if some other consoles or software are already controlling the
devices. Control is limited to 4 CL/QL consoles.
Check if all the IP addresses are in a compatible range.
Check the CL/QL SETUP->NETWORK menu. The IP address for MIXER
CONTROL must be in a different subnet (number range) to the IP address
for DEVICE CONTROL.
Check if the PORT ASSIGN has been made correctly (see page 12
above).
Check all the device firmware is up to date: CL/QL consoles, R series
devices, Shure wireless devices.
8 Reference Websites
www.yamahaproaudio.com
www.shure.com
www.audinate.com
Video about controlling Shure receivers from Yamaha CL/QL consoles:
https://www.youtube.com/watch?v=6Cj2jhbkPSE
https://www.youtube.com/watch?v=N0bTpP5nrCA