User Manual
Table Of Contents
Support for Dante Domain Manager
V4.5 Supplementary Manual
4
Support for Dante Domain Manager
Now supports the Dante Domain Manager (DDM).
CL series and QL series
When a DDM server exists in the network, or when enrolling a domain, the DANTE DOMAIN
MANAGER section is shown at the top of the DANTE SETUP screen.
1 STATE
Displays the status of domain participation.
• Domain: Domain is enrolled
• Disconnected: Domain is enrolled without connecting to the DDM server
• Unmanaged: Domain is not enrolled
2 LOCAL
Displays the access status of the Dante settings (including the DANTE PATCH settings)
on the current operating unit.
• Read Write: Editing is available
• Read Only: Editing is disabled
3 REMOTE
Displays the access status of the Dante settings of the external Dante devices.
• Operator: Editing is available
• Guest: Reading is available, editing is disabled
• None: Reading and editing are disabled
The display changes depending on the REMOTE settings.
• I/O DEVICE screen
• DANTE PATCH screen, DANTE SETUP DEVICE MOUNT screen
1 2 3