User Manual

Yamaha Professional Audio CL StageMix V8 User Guide
Page 20
When [LAST CUE] mode is active, only one channel can be cued at a time.
When [MIX CUE] mode is selected, multiple channels can be cued
simultaneously.
The [CUE CLEAR] button will cancel any cues that have been activated. This
is useful when there are multiple cues to cancel, and when some are hidden in
other layers.
4.7 Dual Cue Mode
With V4 firmware and higher, a second cue bus (Cue B) can be created using
Matrix 7/8. This assignment can be made in the console only.
4.7.1 Channel Mode
In Channel mode, every channel in the console can be assigned to one
of the following Channel Settings:
• A
• B
• A+B
These assignments will be displayed as part of the CUE button for
every channel in StageMix:
If a Cue for a channel is active, the Cue button will be yellow.
4.7.2 Cue Clear
In Channel Mode, a popup will appear when the [CUE CLEAR] button
is pressed. This provides a choice of which Cue busses will be cleared:
• [A]
• [B]
• [ALL]
4.7.3 Remote Mode
In Remote mode, Cue functions in StageMix will exclusively control the
Cue B Bus.
If the [CUE CLEAR] button is pressed, the Cue B Bus will be cleared.
4.8 SOLO Mode
When SOLO mode is ON, the [CUE] buttons in StageMix change to [SOLO]
buttons. These buttons turn red when they are enabled.
Note: this does not apply if Remote mode is also active.