User Manual

Yamaha Professional Audio CL StageMix V8 User Guide
Page 25
4.10.7 Phantom Power
The 48V phantom power status for each input channel is also displayed
at the top of each channel strip when GAIN mode is active. The 48V
indicator will appear in red when phantom power is active.
Phantom Power for each channel can be switched On or Off from
StageMix if the relevant preference is ON in the SETUP screen (refer to
10.5). Tap on the [48V] button and a confirmation popup will appear.
By default, the 48V phantom power indicators are display-only and
cannot be edited from StageMix.
4.10.8 Phase
The Phase setting for each input channel appears near the top of the
channel strips when GAIN mode is active. The Phase setting can be
edited from StageMix by pressing this button. The button will have a
grey background when the Phase setting is normal and will change to
an orange background when Phase is reversed.
4.10.9 Dante Wireless Microphone Control and Monitoring
When a Dante based wireless microphone is patched and assigned to
an input channel, the channel GAIN fader background color will change
to Purple and control and monitoring of the wireless microphone will be
displayed above the fader.
The fader will control the output gain of the wireless receiver(RX)
channel. Above the fader, the current battery status of the wireless
microphone is displayed. To the right-side of battery indicator, the Mute
status of the receiver audio output is shown (if available on the wireless