User Manual
Table Of Contents
- 1.0 System Requirements
- 2.0 Wi-Fi Settings
- 3.0 Getting Started
- 4.0 Mixer Window
- 4.1 Channel Bank Navigation
- 4.2 Layer Navigation
- 4.3 Channel Names and Colors
- 4.4 Faders
- 4.5 Channel ON
- 4.6 CUE
- 4.7 Dual Cue Mode
- 4.8 SOLO Mode
- 4.9 Master Bank
- 4.10 GAIN
- 4.10.1 Digital Gain
- 4.10.2 Gain Compensation Mode
- 4.10.3 Analog Gain / Digital Gain Link
- 4.10.4 ALL GC ON
- 4.10.5 ALL GC OFF
- 4.10.6 Input Port
- 4.10.7 Phantom Power
- 4.10.8 Phase
- 4.10.9 Dante Wireless Microphone Control and Monitoring
- 4.10.10 Non-Dante Wireless Microphone Control and Monitoring
- 4.10.11 Input Port Patching
- 4.10.12 Input Port Patch Options
- 4.10.13 Multi-Channel Input Patching
- 4.11 SENDS ON FADERS
- 4.12 DCA GROUP MASTER FADERS
- 4.13 DCA GROUP ASSIGNMENT
- 5.0 EQ / PAN / 5.1 / DYNAMICS/ SENDS
- 6.0 OUTPORTS
- 7.0 UTILITY
- 8.0 RACK
- 8.1 GEQ Racks
- 8.2 EFFECT Rack
- 8.3 EFFECT EDITING
- 8.3.1 Current Effect
- 8.3.2 Effect Type Selection
- 8.3.3 Effect Library
- 8.3.4 Input and Output Patch Assignments
- 8.3.5 Input and Output Meters
- 8.3.6 Effect Bypass
- 8.3.7 Effect Cue
- 8.3.8 Close Effect Editor
- 8.3.9 Parameter Editing using Sliders
- 8.3.10 Numerical Parameter Editing
- 8.3.11 Multi-Segment Buttons
- 8.3.12 Accessing Parameters
- 8.3.13 Additional Parameters
- 8.3.14 Wet/Dry Mix
- 8.4 GRAPHICAL EFFECT EDITING
- 8.4.1 REV-X Time/Level Parameters
- 8.4.2 REV-X Space Parameters
- 8.4.3 REV-X Filter Parameters
- 8.4.4 REVERB Time/Level Parameters
- 8.4.5 REVERB Space Parameters
- 8.4.6 REVERB Filter Parameters
- 8.4.7 REVERB Dynamics Parameters
- 8.4.8 STEREO REVERB Program
- 8.4.9 MONO/STEREO/MOD DELAY Parameters
- 8.4.10 DELAY LCR Parameters
- 8.4.11 ECHO Parameters
- 9.0 SCENE MEMORY
- 10.0 SETUP
- 10.1 Fader Delay
- 10.2 Filled EQ Graph
- 10.3 Enable Inc/Dec Scene Recall
- 10.4 Show Send Levels in Meter Bridge
- 10.5 Enable Phantom Power Switching
- 10.6 Set EQ band to 0dB with Double-Tap
- 10.7 Show dB Markings on Mixer
- 10.8 Set DCA to 0dB with Double-Tap
- 10.9 Disable Screen Auto-Lock
- 10.10 Cue Operation Mode
- 10.11 Cue A Mode
- 10.12 Cue B Mode
- 10.13 Solo in Place Mode
- 10.14 Channel Select – StageMix Follows Console
- 10.15 Channel Select – Console Follows StageMix
- 10.16 Input Meter Point
- 10.17 Output Meter Point
- 10.18 Display Key Input for Dynamics Meters
- 10.19 RTA Peak Hold Mode
- 10.20 RTA Input Gain
- 10.21 RTA Number of Bands
- 11.0 Troubleshooting
Yamaha Professional Audio CL StageMix V8 User Guide
Page 3
4.11.1
Mix Send Levels ..................................................................................... 32
4.11.2 Mix Sends ON......................................................................................... 33
4.11.3 Mix Send PRE/POST .............................................................................. 33
4.11.4 Global PRE/POST .................................................................................. 33
4.11.5 Stereo Mix Pan ....................................................................................... 33
4.11.6 Selected MIX/MT Overview in Sends on Faders .................................... 33
4.11.7 Mix/Matrix Send Copy and Paste ............................................................ 34
4.12 DCA GROUP MASTER FADERS .............................................................. 35
4.13 DCA GROUP ASSIGNMENT ........................................................................ 36
5.0 EQ / PAN / 5.1 / DYNAMICS/ SENDS ............................................................. 37
5.1 EQ .............................................................................................................. 37
5.1.1 EQ Curve in Mixer Window ..................................................................... 37
5.1.2 Selecting PEQ or GEQ ........................................................................... 38
5.1.3 Accessing the EQ Editing Screens ......................................................... 38
5.2 PARAMETRIC EQ EDITING ...................................................................... 39
5.2.1 Gain and Frequency Lock ....................................................................... 40
5.2.2 HPF ........................................................................................................ 40
5.2.3 EQ Bands 1 & 4 ...................................................................................... 41
5.2.4 EQ ON .................................................................................................... 41
5.2.5 EQ RESET ............................................................................................. 41
5.2.6 EQ TYPE ................................................................................................ 42
5.2.7 PEQ COPY/PASTE ................................................................................ 42
5.2.8 RTA ON ................................................................................................... 42
5.2.9 RTA HOLD .............................................................................................. 43
5.2.10 BAND BYPASS ....................................................................................... 43
5.3 GRAPHIC EQ EDITING ............................................................................. 44
5.3.1 Navigation in the GEQ Overview Section ............................................... 44
5.3.2 Rack Position .......................................................................................... 44
5.3.3 GEQ Type ............................................................................................... 45
5.3.4 Insert Position ......................................................................................... 45
5.3.5 RTA ON ................................................................................................... 45
5.3.6 RTA HOLD .............................................................................................. 45
5.3.7 GEQ FLAT .............................................................................................. 45
5.3.8 GEQ Copy/Paste .................................................................................... 45
5.3.9 GEQ ON ................................................................................................. 45
5.3.10 Editing GEQ Bands ................................................................................. 46
5.3.11 Navigation in the GEQ Editing Section ................................................... 46
5.4 8-BAND PEQ EDITING .............................................................................. 47
5.4.1 EQ TYPE ................................................................................................ 47
5.4.2 HPF ........................................................................................................ 48
5.4.3 LPF ......................................................................................................... 48
5.4.4 EQ RESET ............................................................................................. 48
5.4.5 PEQ COPY/PASTE ................................................................................ 48
5.4.6 EQ ON .................................................................................................... 48
5.4.7 Insert Position ......................................................................................... 48
5.4.8 RTA ON ................................................................................................... 49
5.4.9 RTA HOLD .............................................................................................. 49
5.4.10 Gain and Frequency Lock ....................................................................... 49
5.4.11 BAND BYPASS ....................................................................................... 49
5.4.12 NOTCH FILTERS ................................................................................... 49