User Manual

66
Registering devices to control — the Device Management button
Here’s how to register a device of the target system that will be con-
trolled from the custom panel you created.
The device/parameter that’s controlled by a widget in the custom
panel is determined by the Model and Unit ID or IP address that you
register here.
1. You’ll use Design mode to register a device. If you’re
in Control mode, use the Operation Mode button to
switch to Design mode.
* If the menu bar is hidden, unhide it in either of the following ways.
• Touch the upper left of the screen, and authenticate using an adminis-
trator code.
• Close ProVisionaire Touch and then re-open it; then authenticate the
applicable file with an administrator code and reload it.
2. Tap the Device Management button .
3. Tap [Add Device].
Registering a device