User Manual

74
 Example network settings for the iPad
1. In the home screen of the iPad, tap [Settings]  [Wi-Fi].
2. Turn the [Wi-Fi] switch On ( ), and from the access
point list that appears, select the access point of the
target system.
3. Enter the password of the Wi-Fi access point.
4. Make network settings.
 If obtaining the IP address automatically
1. Tap , and set [Configure IP] to [Automatic].
2. Verify that “IP Address,” “Subnet Mask,” “Router,” and “DNS”
are set.
3. Click the home button to complete the settings.
 If specifying the IP address manually (when it can-
not be obtained automatically)
1. Tap , and set [Configure IP] to [Manual].
2. In “IP Address,” enter the IP address of the target system,
changing only the fourth octet (in the illustration above,
“200”).
3. In “Subnet Mask,” enter “255.255.255.0.”
4. In “Router,” enter the IP address of the router or the IP
address of the Wi-Fi access point.
5. In “DNS,” enter the IP address of the DNS or the IP address
of the Wi-Fi access point.
6. Click the home button to complete the settings.