User Manual

59
 Sliders
There is only one type of slider widget.
 Slider properties
Here we explain the parameters that are shown in the “Properties”
area when the focus is on a slider. Depending on the settings, some
parameters are not shown.
Areas whose Value field is darkly shaded cannot be edited.
Items with an “*” in Property are style-related information.
You can assign parameters of multiple devices, or multiple parame-
ters of the same device to a [Slider] (up to 16 parameters maximum).
A slider to which multiple parameters are assigned is called a “multi
slider.” When you drag and drop a parameter to a slider for which a
parameter has already been assigned, a confirmation dialog box is
displayed, asking whether you want to replace or add the parameter,
or cancel.
The assigned parameter can be viewed or edited in the “Target Edi-
tor” dialog box, which is accessed by the [...] button shown in the
[Control] field of the “Properties” area.
This cannot be configured with a ProVisionaire Touch KIOSK con-
troller.
Property Value
[General] Overall properties of the widget
[Name] The name of the widget. If you place the
widget first and assign a parameter
later, you can enter a name here to indi-
cate the parameter that you intend to
assign.
[Type] The type of widget.
[Visible] Selects whether the widget is visible or
invisible in control mode.
[Read Only] Selects whether the widget can be
operated. If you select [Yes], the widget
functions as an indicator.
[Control] Overall information on what is con-
trolled
[Model] The model name of the device.
[Device Identifier] The identifier of the device. The unit ID
or the IP address is shown.
[Parameter
Address]
The parameter name assigned to the
widget.
[Input Channel]
etc.
The parameter’s channel number, etc.
The name differs depending on the
parameter that is assigned.
[Upper Bound
Value]
Specifies the maximum value.
[Lower Bound
Value]
Specifies the minimum value.