User Guide

Yamaha Professional Audio CL StageMix V4.5 User Guide
Page 44
7.3 OSCILLATOR
The OSCILLATOR screen in the UTILITY mode allows you control all aspects
of the Oscillator in the CL series console.
7.3.1 Oscillator Assign
In the top part of the screen, an array of buttons allow you to assign the
Oscillator output to any channel or bus in the console. Each channel button
displays the channel’s number, name and color. Assignment to multiple
channels simultaneously is allowed.
Below this area, three buttons provide access to different banks of Input or
Output channels. If the Oscillator has been assigned to a channel in any of
these banks, the word “ASSIGNED” will appear in that bank’s button.
To the right of the bank buttons, the [CLEAR ALL] button allows all Oscillator
assignments to be cleared.
7.3.2 Oscillator Output
The large [OUTPUT] button turns the Oscillator On or Off. A meter alongside
this button displays the Oscillator’s output level.
7.3.3 Oscillator Level Control
The horizontal LEVEL slider allows the Oscillator’s level to be adjusted.
7.3.4 Oscillator Frequency
The horizontal FREQ slider allows the Oscillator’s frequency to be adjusted.
Note: this parameter is only available when SINE mode is active.