User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Master fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Dante Device Lock
- Support for Dante Domain Manager
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
- Warning/Error Messages
- Index
- Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/Output Characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Contents
V5 Reference Manual
3
I/O devices and external head amps .................................... 173
Using an I/O device ............................................................................................. 173
Remotely controlling an R series unit ................................................................... 175
Third-party equipment’s HA control function....................................................... 180
Remotely controlling an amp............................................................................... 182
Remotely controlling WIRELESS unit..................................................................... 183
Using an external head amp ................................................................................ 187
MIDI....................................................................................... 192
MIDI functionality on the CL series console.......................................................... 192
Basic MIDI settings .............................................................................................. 192
Using program changes to recall scenes and library items.................................... 195
Using control changes to control parameters....................................................... 197
Using parameter changes to control parameters .................................................. 199
Recorder................................................................................ 200
About the USB memory recorder ......................................................................... 200
Assigning channels to the input/output of the recorder ....................................... 200
Recording audio to a USB flash drive.................................................................... 202
Playing back audio files from a USB flash drive ..................................................... 204
Editing the title list............................................................................................... 205
Recording or playing back using a computer DAW .............................................. 206
Using the CL console with Nuendo Live............................................................... 209
Setup ..................................................................................... 213
About the SETUP screen....................................................................................... 213
User settings ........................................................................................................ 215
Preferences .......................................................................................................... 222
USER DEFINED keys ............................................................................................. 224
Functions that can be assigned to USER DEFINED keys ........................................ 226
USER DEFINED knobs........................................................................................... 231
Functions that can be assigned to USER DEFINED knobs ...................................... 232
Assignable encoders ............................................................................................ 234
Functions that can be assigned to the assignable encoders .................................. 235
GAIN/PAN/ASSIGN knob (assignable encoder) functions ..................................... 236
Custom fader bank .............................................................................................. 236
Master fader ........................................................................................................ 237
Custom fader bank functions ............................................................................... 238
Console Lock ....................................................................................................... 238
Saving and loading setup data to and from a USB flash drive............................... 239
Formatting a USB flash drive................................................................................ 245
Word clock and slot settings ................................................................................ 246
Using cascade connections .................................................................................. 248
Basic settings for MIX buses and MATRIX buses ................................................... 252
Switching the entire phantom power supply on/off.............................................. 253
Specifying the brightness of the touch screen, LEDs, channel name displays,
and lamps ................................................................................................. 253
Setting the date and time of the internal clock ..................................................... 254
Setting the network address ................................................................................. 254
Dante audio network settings ............................................................................... 256
Dante Device Lock................................................................................................ 258
Support for Dante Domain Manager .................................................................... 259
Using GPI (General Purpose Interface) .................................................................. 271
Help function......................................................................... 276
Loading a Help/text file from a USB flash drive ..................................................... 276
Viewing Help........................................................................................................ 276
Using USER DEFINED keys to recall Help directly................................................... 277
Other functions ..................................................................... 278
Initializing the unit to factory default settings ....................................................... 278
Adjusting the detection point of the touch screen (Calibration function) .............. 278
Adjusting the faders (Calibration function) ........................................................... 279
Fine-tuning the input and output gain (Calibration function) ............................... 279
Adjusting the channel color (Calibration function)................................................ 281
Adjusting the brightness of the channel name display .......................................... 281
Adjusting the contrast of the channel name display.............................................. 282
Initializing the console settings and Dante audio network settings........................ 282
Update procedure for NAME SUB CPU firmware................................................... 283
Update function to Dante firmware ...................................................................... 283
Warning/Error Messages ...................................................... 284
Index...................................................................................... 287