User Manual

Table Of Contents

Top panel

Owner’s Manual

Display section

This is a touch screen that you can operate by touching the

surface of the screen. You can touch your finger to the

screen to select menus or set parameters. Please note that

you cannot operate the unit by touching multiple points

simultaneously.

NOTE

If the touch screen becomes dirty, wipe it with a soft dry

cloth.

NOTICE

Never use a sharp or pointed object such as your fingernail

to operate the touch panel. Doing so may scratch the

screen and render the touch screen inoperable.

Centralogic section

This section enables you to control up to eight channel

modules that are selected from channel groups, DCA

groups, or custom groups selected by the Bank Select keys.

1 Bank Select keys

Select a bank to be controlled in the Centralogic

section. Press the [INPUT] key, then press one of the

Bank Select keys below to route the channel bank

(labeled to the left of the key) to the Centralogic

section. Press the [OUTPUT] key, then press one of

the Bank Select keys below to route the channel

(labeled to the right of the key) to the Centralogic

section.

2 Multifunction knob

Controls the knob currently selected on the touch

screen. The knob function can vary depending on the

screen currently displayed.

3 [SEL] key

4 [CUE] key

5 Meter LEDs

Same as those in the Channel Strip section.

6 [ON] key

Switches the channel on or off. If a channel is on, the

key LED will light. In SENDS ON FADER mode, this

is an on/off switch for signals sent from each channel