User Manual
Table Of Contents
- Contents
- Support for Shure AXT400, QLXD4 and ULXD4
- Selected Channel section (QL series only)
- Input and output patching
- Input/Output channels
- EQ and Dynamics
- Meters
- I/O devices and external head amps
- Setup
- CL/QL Editor V4.1 Supplementary Manual
- Reading and Writing CSV files
- Support for devices that do not feature Dante output
Support for devices that do not feature Dante output
V4.1 Supplementary Manual
27
When the receiver is off
QLXD4 and ULXD4 display
Overview window (INPUT CH window)
The HA display appears as shown below.
AXT400 display
When the receiver is on and connected via a ShowLink® remote control
When the receiver is on and not connected via a ShowLink® remote control
QLXD4 and ULXD4 display
The RF channel (A or B) display
has the same design as for the
AXT400.
The RF level is shown for two
channels (A and B).
The RF channel (A or B) display
has the same design as for the
AXT400.