User Manual
Table Of Contents
- Contents
- Support for Shure AXT400, QLXD4 and ULXD4
- Selected Channel section (QL series only)
- Input and output patching
- Input/Output channels
- EQ and Dynamics
- Meters
- I/O devices and external head amps
- Setup
- CL/QL Editor V4.1 Supplementary Manual
- Reading and Writing CSV files
- Support for devices that do not feature Dante output
Support for Shure AXT400, QLXD4 and ULXD4
V4.1 Supplementary Manual
7
This section explains how to control Shure wireless mics that do not output Dante
signals.
Example: Connecting the output of an AXT400 to OMNI 1 on a CL console, and
assigning the signal to input channel 1.
Press the PORT ASSIGN button to open the PORT SELECT window.
Select the port to which the output from the AXT400 is connected (OMNI 1).
Access the GAIN/PATCH window.
Press the INPUT PORT button, and on the PORT SELECT window select the port to which
the output signal from the AXT400 is connected (OMNI 1).