User Manual

R Remote Version 2 User’s Guide 14
Main Area
This area shows the state of the selected R series unit and allows basic parameter editing. The display
depends on the model.
For Rio3224-D / Rio1608-D / Ri8-D
The screen is explained here using the Rio3224-D as an example. The number of items in the HA
display area differs depending on the model.
The
Edit window opens if you double-click or right-click and choose [Open Edit Window] anywhere
other than on a controller.
① HA display area
Here you can view and edit HA settings for the Rio3224-D / Rio1608-D / Ri8-D unit.
If you press the left mouse button on an area that shows the device's jack number, the indicator of
the actual device's corresponding jack will light.
ⓐ [+48V] button
Turns phantom power on/off for each channel.
ⓑ GAIN knob
Specifies the analog gain for the HA of the device. The current setting is shown in the
numeric box located below the knob.