User Manual

Yamaha Professional Audio CL StageMix V7 User Guide
Page 16
Left/Right navigation buttons can be used to navigate to other meter
blocks without leaving the assignment pop-up. To exit the assignment
pop-up, touch anywhere outside of the pop-up or touch the close button
in the top right corner.
On the far-right side, is the master block. This block can be assigned as
either the standard master bank (as found in the standard meter bridge
in StageMix), or as the custom master bank as set on the console.
Please note, it is not possible to edit Custom Fader Bank channel
assignments from StageMix. Please use the Console or CL Editor for
this function.
4.2.2 Custom Fader Bank Naming
Once a fader bank has been assign to a meter bridge block, a name
can be given to the bank.
Double tap on the desired fader bank in the meter bridge to open the
keyboard. Once a name has been applied, press [return] to close the
keyboard.
Alternatively, use the left/right arrow keys to move to other banks along
the meter bridge, to name those banks without having to close the
keyboard and re-select the next block.
The bank name is now displayed under the applicable fader block in the
meter bridge.
The name is linked to the chosen fader bank, not the block position in
the meter bridge. If a named fader bank is changed to a different meter
bridge block location, the name of that bank will automatically follow.