User Manual

Yamaha Professional Audio CL StageMix V7 User Guide
Page 27
The selected channel number and name is displayed in the top line of
the window at the top of the view. Underneath this, is the currently
applied input port.
Select the port type from the bottom area of the view, and then select
required input port to change the input patch for the selected channel.
A patch change confirmation message may apply. This will depend on
the Patch Confirmation settings, as found in User Preferences on the
connected mixing console.
To change the patch of another input channel, use the left/right arrow
buttons to navigate up or down the consoles input channels.
Alternatively, press and hold on either of the arrow buttons to open a
navigation window, from which any input channel can be directly
selected.
Please note – the CH Select Follow options apply, as configured in
StageMix [SETUP].
Input level metering is shown to the right side of each patch button.
Select [CLOSE] to exit the Input Port Patch view.