User Manual

CL Editor Installation Guide 8
When using Mac OS X
1 Click the [System Preferences] icon on Dock.
The “System Preferences” window appears.
2 Click the [Network] icon.
The “Network” window appears.
3 Click [Ethernet].
The Ethernet settings appears.
NOTE If there are multiple Ethernet choices, select the one that is connected to the device.
4 Select [Manually] in [Configure IPv4] or [Configuration]. Input the IP address of the computer in
[IP Address], “255.255.255.0” in [Subnet Mask], and the IP address of the router (gateway) in
[Router] individually.
NOTE Please contact your network administrator for these settings when you connect the computer to the QL in the existing network.
5 Click [Apply].
The network settings are applied.