User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Control
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Screen structure
- Basic process
- Start up, and register devices
- Placing widgets on a page
- Labeling widgets for easier recognition
- Adding a page
- Specifying a background for the page
- Adjusting the placement of the widgets
- Saving the project file
- Testing operation
- Making security settings
- Creating a controller file
- Making KIOSK start automatically
- Adding parameters or meters for an MTX/MRX system
- Functions specific to initial mode
- Title bar
- Menu bar
- Tool bar
- “Controllers” area
- “Devices” area
- “Widgets” area
- Work area
- “Properties” area
- Widgets
- Dialog boxes and windows
- “Setup” dialog box
- “New Project Wizard” dialog box
- “Add Controller” dialog box
- “Run Controller File” dialog box
- “Import Controller File” dialog box
- “Select Controllers to Import” dialog box
- “Export Controller File” dialog box
- “Imported Images” dialog box
- “Add Device” dialog box
- “Target Editor” dialog box
- “Edit Text” dialog box
- “Edit Device Identifier” dialog box
- “Select Image” dialog box
- “Master Style” dialog box
- “System Monitor” window
- “ProVisionaire Monitoring Service Settings” view
- Specifying the IP address
- Tips
- Troubleshooting
33
Adding parameters or meters for an MTX/MRX system
Since the MRX is freely configurable, it is not possible to register
parameters or meters in ProVisionaire Control ahead of time.
In order to place the MRX’s parameters or meters in the work area,
start MRX Designer; then from MRX Designer’s “Parameters” area
or from the component editor, drag and drop parameters or meters
into the ProVisionaire Control work area while holding down the
<Ctrl> key.
In the same way, parameters or meters of the MTX/MRX system
(except for the MRX) can be dragged and dropped from MTX-MRX
Editor into the work area of ProVisionaire Control while holding
down the <Ctrl> key to place them.
NOTE
If the controller’s “Type” is “ProVisionaire Touch Kiosk,” and you attempt
to place a widget that ProVisionaire Touch does not have, it is replaced
by a widget that has similar functionality.