User Manual

Table Of Contents

CL Editor Owner’s Manual

A LOW shelving

If this button is on, the LOW EQ will be switched to a shelving type. If the EQ type is PRECISE, the Q knob of LOW EQ

adjusts the Q value of the shelving type EQ. For other EQ types, the Q knob of the LOW EQ is not shown.

B TYPE I/TYPE II

If the EQ type is LEGACY, you can choose one of two types: TYPE I or TYPE II.

C ATT (Attenuation)

Adjusts the amount of attenuation for the signal level of pre EQ.

❏ DYNAMICS1/2

You can select one of the following types for each of the two dynamics processors.

If GATE/DUCKING is selected

1 TYPE

Indicates the type of the currently selected gate/ducking. You can click here to select the type. Ducking is the effect that

activates compressor triggered by another sound source.

2 LIBRARY

This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the Library window.

3 ON

This button switches on/off for the gate or the ducking.

4 Response curve

Indicates the response for the gate/ducking of the currently selected channel.

5 GR meter (Gain Reduction meter)

This meter indicates the amount of gain reduction produced by the gate/ducking.

6 THRESH (Threshold level)

Specifies the level (the threshold level) at which the gate/ducking will activate. The gate will open (or the ducking will

activate) when the key-in signal exceeds this level, and the gate will close (or the ducking will deactivate) when the sig-

nal falls below this level.

7 RANGE

Specifies the amount by which the signal is attenuated while the gate is closed (or while the ducking is activated.)

DYNAMICS1 GATE, DUCKING, COMPRESSOR, EXPANDER

DYNAMICS2 COMPRESSOR, COMPANDER-H, COMPANDER-S, DE-ESSER

1 235