User Manual

CL Editor Owner’s Manual
58
Here you can assign the input/output port for each channel, its direct output, and its insert-in/out.
This window is divided into INPUT PATCH, OUTPUT PATCH, INPUT INSERT PATCH, OUTPUT INSERT PATCH,
DIRECT OUT PATCH, and PATCH LIST pages. To switch pages, click the tabs shown in the upper part of the window.
To display this window, choose [Patch Editor] from the [Windows] menu, and select either “INPUT PATCH,” “OUTPUT
PATCH,” “INPUT INSERT PATCH,” “OUTPUT INSERT PATCH,” “DIRECT OUT PATCH,” or “PATCH LIST.”
INPUT PATCH page
Here you can select the input port that is assigned to the input of each input channel.
❏ HA INFO
Specifies whether the HA setting for the input port will be copied from the original channel when you modify the patching.
1 TAKE FROM PORT button
The HA setting will not be copied from the original channel. The HA setting for the port will remain the same, even if
patching is changed.
2 TAKE FROM CHANNEL button
The HA setting will be copied from the original channel. The HA setting for the previously-patched port will be applied
to a newly-patched port.
❏ AUTO SETUP
3 PRESET button
Initializes the patching in this page.
4 CLEAR ALL button
Clears all patching in this page.
Patch Editor window
1
2
3
4