User Manual

27. YDIF
27.1. YDIF
YDIF is a digital audio transmission format that can send and receive up to 16 channels of audio and wordclock
using an Ethernet cable. By connecting devices (MTX/XMV/EXi8/EXo8) via Ethernet cable, a maximum of 16
channels of audio signals can be transferred without degradation.
By using YDIF, it is possible to easily switch signal routing without changing cable connections.
For example, as shown in the diagram below, a situation such as "outputting the same microphone input signal
from multiple speakers" can be handled just by setting the YDIF routing.
27.2. YDIF setting method (Project sheet)
Place the YDIF component in the Device area on the Project sheet. The wizard-based YDIF setting screen will be
displayed at this point.
On the YDIF Connected screen, select the Model being used from the pull-down menu and press [Next].
27. YDIF
342 | ProVisionaire Design User Guide