Reference Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Graphic EQ, effects, and Premium Rack
Reference Manual
117
4. Use the MODULE SELECT buttons to select the item you want to mount, and press
the OK button.
5. To select the input source for a rack, press the INPUT PATCH button for that rack.
The CH SELECT popup window will appear, allowing you to select the input source for the rack.
Switch the list as necessary, and select the input source channel that you want to patch.
When you select an input source in the CH SELECT popup window, a dialog box will ask you for
confirmation. To confirm the operation, press the OK button.
NOTE
• You have the option of making settings so that the confirmation dialog box will not appear
(see page 169).
• Normally you can specify two channels of input for each rack. However if you have selected
31BandGEQ, only one channel can be used.
1 Category select list
Selects the category of channel shown in the popup window.
• MIX/MATRIX.................................. MIX 1–24, MATRIX 1–8
*1, *2
• ST/MONO......................................... STEREO L/R, MONO
*1, *2
• INSERT OUT 1–32.......................... CH 1–32
*1
• INSERT OUT 33–64 ....................... CH 33–64
*1
• INSERT OUT 65–72 ....................... CH 65–72
*1
• INSERT OUT MIX/MATRIX ....... MIX 1–24, MATRIX 1–8
• INSERT OUT ST/MONO .............. STEREO L/R, MONO
*1. Not displayed for GEQ 1–16 RACK.
*2. Not displayed for PREMIUM 3–8 RACK. Displayed only for PREMIUM 1–2 RACK.
NOTE
In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
2 Channel select buttons
Use these buttons to select the input source channel.
3 CLOSE button
Closes the popup window.
NOTE
In the case of the GEQ, patching it to either an insert-out or insert-in will automatically assign the
other patch point to the same rack. Also, insert mode will automatically be switched on.
Additionally, if you defeat the insert-out or insert-in of a GEQ, the other patch point will
automatically be defeated and at the same time insert mode will automatically be switched off.
For more information on insert-in/out, see “Inserting an external device into a channel” on
page 21.
6. To select the output source for a rack, press the OUTPUT PATCH button for that
rack.
The CH SELECT popup window will appear, allowing you to select the output destination for the
rack. Switch the list items as necessary, and select the output destination that you want to use.
When you select an output destination in the CH SELECT popup window, a dialog box will ask
you to confirm the change. To confirm the change, press the OK button.
NOTE
• You can make settings such that the confirmation dialog box will not appear (see page 169).
• Normally you will be able to specify two channels of output for a rack, but if the 31BandGEQ is
selected only one channel can be used.
1 Category select list
Selects the category of channel shown in the popup window.
• CH 1–32 ......................................CH 1–32
*1, *2
• CH 33–64.................................... CH 33–64
*1, *2
2
31
3
2
1