Reference Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
User settings (Security)
Reference Manual
166
Changing the user level
You can view or change the user level.
• Administrator ...........The Administrator does not have a user level setting, but can change the
user level setting of the Guest account.
• Guest ...........................The Guest can view the user level setting of the Guest account, but
cannot change it.
• Normal user...............A normal user can view the user level setting of his or her User account,
but cannot change it.
• Power User .................A power user can view and change his or her User account.
1. In the Function Access Area, press the SETUP button to access the SETUP screen.
2. Press the USER SETUP button to access the USER SETUP popup window.
3. Press the USER LEVEL tab to access the USER LEVEL page.
If you are logged-in as the Administrator, you can switch to the USER LEVEL for GUEST page,
and view or change the user level of the Guest account.
This page includes the following items.
1 CH OPERATION
Here you can specify (for each channel) the operations that will be permitted for input channels,
output channels, and DCA groups. The settings will apply to the currently selected channel.
Settings for currently-selected channels will be displayed below the CH OPERATION section.
Use the panel [SEL] keys or the Selected Channel field in the Function Access Area to select the
channel for which you want to make settings.
The type of buttons shown will depend on the selected channel or group.
INPUT channel.............................. [HA], [PROCESSING], [FADER/ON]
MIX/MATRIX channel ................[WITH SEND], [PROCESSING], [FADER/ON]
STEREO/MONO channel............ [PROCESSING], [FADER/ON]
DCA group.....................................[DCA MASTER], [DCA GROUP ASSIGN]
3
4
1
8
2
6
7
5