Reference Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
User settings (Security)
Reference Manual
167
• HA................................................ Restricts operation of the HA (Head Amp) patched to that
channel.
• PROCESSING ........................... Restricts operation of all signal processing parameters for that
channel (excluding the fader, channel on/off, and send level).
• FADER/ON ................................ Restricts operation of that channel’s fader, channel on/off, and
send level.
• WITH SEND ............................. Restricts operation of that channel’s send parameters. (From
MIX, From MATRIX)
• DCA MASTER .......................... Restricts operation of that channel’s DCA group fader, ON/
OFF, and ICON/COLOR/NAME.
• DCA GROUP ASSIGN............ Restricts changes of assignment to that DCA group.
• SET BY SEL................................ If this button is on, you can press the panel [SEL] key of a
channel to enable or disable the operating restrictions for that
channel.
2 CURRENT SCENE
Specifies the operations that can be performed on the current scene memory.
• INPUT PATCH/INPUT NAME.................. Restricts operations for input channel patching
and names.
• OUTPUT PATCH/OUTPUT NAME......... Restricts operations for output channel patching
and names.
• BUS SETUP................................ Restricts operations for bus setup.
• GEQ RACK/EFFECT RACK/PREMIUM RACK
........................................ Restricts operations for the racks. Press this area to open the
RACK USER LEVEL popup window, in which you can set this
restriction. However, there will be no restriction on operating
the MIDI CLK button displayed for delay-type and
modulation-type effects, or the PLAY/REC button displayed
for the FREEZE effect.
• MUTE GROUP ASSIGN/MUTE GROUP MASTER
........................................ Restricts operations for mute group assignment and mute
group master.
NOTE
In the case of the CL3/CL1, faders that do not exist on those models will not be shown.
3 SCENE LIST
Specifies the operations that can be performed on scene memories.
•STORE/SORT operations
•RECALL operations
4 LIBRARY LIST
Specifies the operations that can be performed on libraries.
• STORE/CLEAR operations
•RECALL operations
5 FILE LOAD
Specifies the settings that will be applied when a file is loaded from a USB flash drive. The user
authentication key contains settings such as the user level, preferences, and the USER DEFINED
key settings (USER SETUP settings). Other data is saved in an “ALL” file. The “ALL” file also
includes the USER SETUP settings of the Administrator and the Guest.
• USER SETUP (Preference and USER DEFINED keys settings)
• SYSTEM SETUP/MONITOR SETUP
• CURRENT SCENE
•SCENE LIST
•LIBRARY LIST
6 MONITOR SETUP
Specifies the monitor setup operations that can be performed.
•OSCILLATOR
•TALKBACK
7 SYSTEM SETUP
Specifies the system setup operations that can be performed.
• MIXER SETUP
•OUTPUT PORT
• MIDI/GPI
8 SET ALL/CLEAR ALL button
Permits/clears all items.
4. Specify the user level by pressing the button for each item that will be permitted.
5. When you have finished making settings, close the popup window and press the
SETUP button in the Function Access Area.