Reference Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Recorder
Reference Manual
182
4 RECORDER INPUT meters
Indicate the level of the signals input to the recorder.
5 PLAYBACK OUT popup buttons (L/R)
Press these buttons to open the CH SELECT popup window, in which you can select the signals
patched to the recorder’s L/R output channels for playback.
6 PLAYBACK OUT GAIN knob
Sets the level of the recorder playback output signal.
7 PLAYBACK OUT CUE button
Press this button to audition the signal output from the recorder.
NOTE
You cannot turn on this button and the RECORDER INPUT CUE button simultaneously.
8 PLAYBACK OUT meters
Indicates the level of the recorder playback output signal.
3. To assign channels to the recorder inputs, press the RECORDER INPUT popup
button L or R.
The CH SELECT popup window will appear.
1 Category list
Enables you to select the type of channels.
2 Channel select buttons
Select the channels that will be patched to the USB memory recorder’s inputs.
• MIX 1–24....................MIX channels 1–24
• MTRX 1–8..................MATRIX channels 1–8
• ST L/R .........................STEREO channel L/R
• ST L+C ....................... STEREO channel L mixed with the MONO (C) channel
• ST R+C....................... STEREO channel R mixed with the MONO (C) channel
• MONO........................ MONO channel
• CH1–72 ...................... Direct output of an INPUT channel 1–72
NOTE
In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
4. Use the category list and the channel select buttons to select the channel that you
want to patch to the USB memory recorder output.
If you select a channel to which a channel is already patched, a dialog box will ask you to confirm
the patch change. Press the OK button in the dialog box.
5. When you have finished assigning the channel, press the CLOSE button.
You will return to the RECORDER screen.
6. Assign a channel to the other input in the same way.
NOTE
The USB memory recorder always records and plays back in stereo. If you want to record in
monaural, with the same signal for left and right, you must assign both of the recorder inputs to
the same channel.
7. To assign channels to the recorder playback outputs, press the PLAYBACK OUT
popup button L or R.
The CH SELECT popup window will appear.
1 Category List
Enables you to select the type of channels.
2
1
2
1