Reference Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Input and output patching
Reference Manual
24
2 DIRECT OUT PATCH button
Press this button to open the PORT SELECT popup window, in which you can select a Direct Out
output port. The name of the currently-selected port appears on the button.
3 DIRECT OUT ON button
Switches the Direct Out on or off.
4 DIRECT OUT LEVEL knob
Indicates the output level of the Direct Out. Press this knob to control the level using the
multifunction knob.
5 APPLY TO ALL INPUT button (input channels only)
Specifies whether the insert point/Direct Out point settings will be applied to all input channels.
INSERT/DIRECT OUT popup window (8ch)
1 DIRECT OUT ON button
Switches the Direct Out on or off. The currently-selected Direct Output point is indicated above
the button.
2 DIRECT OUT PATCH button
Press this button to open the PORT SELECT popup window, in which you can select a Direct Out
output port. The name of the currently-selected port will appear on the button.
3 DIRECT OUT LEVEL knob
Indicates the output level of the Direct Out. Press this knob to control the level using the
multifunction knob.
4. Access either the one-channel or the eight-channel INSERT/DIRECT OUT popup
window, and press the DIRECT OUT popup button.
The PORT SELECT popup window will appear, allowing you to select the output port used for
direct output. The window includes the following items.
1 Category select list
Selects the category of output port shown in the popup window. The categories correspond to the
following output ports. They vary depending on the channel type.
• OMNI/REC ............... OMNI1–OMNI8, REC IN(L), REC IN(R)
• SLOT1 ........................ SLOT1(1)–SLOT1(16)
• SLOT2 ........................ SLOT2(1)–SLOT2(16)
• SLOT3 ........................ SLOT3(1)–SLOT3(16)
• DANTE1–32.............. DANTE1–DANTE32
• DANTE33–64............ DANTE33–DANTE64
2 Output port select buttons
These buttons assign the output port used for direct output of the currently-selected INPUT
channel.
5. Use the output port select tabs and the output port select buttons to specify the
output port that will be used for direct output, and press the CLOSE button.
You will return to the INSERT/DIRECT OUT popup window.
1
2
3
1
2