Reference Manual

ManualsBrandsYamaha ManualsDigital MixersYamaha CL5/CL3/CL1 V1.5

241

242

243

244

245

246

247

248

249

250

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- About the SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL section
- SELECTED CHANNEL VIEW screen
Centralogic section
- About the Centralogic section
- Operations in the Centralogic section
- OVERVIEW screen
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the output patch settings
- Changing the input patch settings
- Inserting an external device into a channel
- Directly outputting an INPUT channel
- Recording or playing back using DAW on a computer
Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
Output channels
- Signal flow for output channels
- Specifying the channel name, icon and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- About EQ and dynamics
- Using EQ
- Using dynamics
- Using the EQ or Dynamics libraries
Grouping and linking
- About DCA groups and Mute groups
- Using DCA groups
- Using mute groups
- Channel Link function
- Copying, moving, or initializing a channel
Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- About the Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
- Operating the Cue function
Talkback and Oscillator
- About the Talkback and Oscillator functions
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, effects, and Premium Rack
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About the internal effects
- Using the Premium Rack
- Using the graphic EQ, effect, and Premium Rack libraries
I/O device and external head amp
- Using an I/O device
- I/O device patching
- Remotely controlling an Rio unit
- Remotely controlling an amp
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using Program Changes to recall scenes and library items
- Using Control Changes to control parameters
- Using Parameter Changes to control parameters
User settings (Security)
- User Level settings
- Preferences
- USER DEFINED keys
- USER DEFINED knobs
- Assignable encoders
- Custom fader bank
- Master fader
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
Recorder
- About the USB memory recorder
- Assigning channels to the input and output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Using the CL console with Nuendo Live
Help function
- Loading a Help file from a USB flash drive
- Loading a text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index

Appendices

Reference Manual

245

■ M.BAND COMP

Two input, two output 3-band compressor, with individual solo and gain reduction metering for each

band.

Premium Rack Processor Parameters

■ Portico5033

This models an analog 5-band EQ made by the RND company.

■ Portico5043

This models an analog compressor/limiter made by the RND company.

LIM.REL

Release time of the limiter

LIM.KNEE 0–5 Knee of the limiter

LIM.BYP OFF/ON Bypasses the limiter

PRESENCE –10 to +10

Positive (+) values lower the threshold of the high band and raise the

threshold of the low band. Negative (–) values do the opposite. If this is

set to 0, the high, mid, and low bands will be affected in the same way.

LOOKUP 0.0–100.0 ms Lookup delay

MAKE UP OFF/ON Automatically adjusts the output level

*1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz)

Parameter Range Description

L-M XOVER 21.2 Hz–8.00 kHz Crossover frequency between the low and mid bands

M-H XOVER 21.2 Hz–8.00 kHz Crossover frequency between the mid and high bands

SLOPE –6 dB, –12 dB Filter slope

LOW GAIN –12.0 dB to +12.0 dB Low band gain

MID GAIN –12.0 dB to +12.0 dB Mid band gain

HI. GAIN –12.0 dB to +12.0 dB High band gain

TOTAL –72.0 dB to +12.0 dB Overall gain

CEILING –6.0 dB to 0.0dB, OFF Restricts the output so that it will not exceed the specified level

LOW THRE –54.0 dB to 0.0 dB Threshold of the low band compressor

LOW RAT 1:1 to 20:1 Ratio of the low band compressor

LOW ATK 0–120 ms Attack time of the low band compressor

LOW REL

*1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz)

Release time of the low band compressor

LOW KNEE 0–5 Knee of the low band compressor

LOW BYP OFF/ON Bypasses the low band compressor

MID THRE –54.0 dB to 0.0 dB Threshold of the mid band compressor

MID RAT 1:1 to 20:1 Ratio of the mid band compressor

MID ATK 0–120 ms Attack time of the mid band compressor

MID REL

Release time of the mid band compressor

MID KNEE 0–5 Knee of the mid band compressor

MID BYP OFF/ON Bypasses the mid band compressor

HI. THRE –54.0 dB to 0.0 dB Threshold of the high band compressor

HI. RAT 1:1 to 20:1 Ratio of the high band compressor

HI. ATK 0–120 ms Attack time of the high band compressor

HI. RAT

Release time of the high band compressor

HI. KNEE 0–5 Knee of the high band compressor

HI. BYP OFF/ON Bypasses the high band compressor

LOOKUP 0.0–100.0 ms Lookup delay

MAKE UP OFF/ON Automatically adjusts the output level

Parameter Range Description

ALL BYPASS OFF, ON

Turns bypass on/off for the EQ. Even in the bypassed state, the signal will

pass through the input/output transformers and the amp circuit.

TRIM –12.0 to 12.0 dB Input gain

LF FREQ 30.00 to 300.0 Hz Center frequency of the LF band

LF GAIN –12.0 to 12.0 dB Gain of the LF band

LMF IN OFF, ON Switches the LMF band on/off

LMF Q 0.70 to 5.00 Q of the LMF band

LMF FREQ 50.00 to 400.0 Hz Center frequency of the LMF band

LMF GAIN –12.0 to 12.0 dB Gain of the LMF band

MF IN OFF, ON Switches the MF band on/off

MF Q 0.70 to 5.00 Q of the MF band

MF FREQ 330.0 to 2500 Hz Center frequency of the MF band

MF GAIN –12.0 to 12.0 dB Gain of the MF band

HMF IN OFF, ON Switches the HMF band on/off

HMF Q 0.70 to 5.00 Q of the HMF band

HMF FREQ 1.80k to 16.0k Hz Center frequency of the HMF band

HMF GAIN –12.0 to 12.0 dB Gain of the HMF band

LF/HF IN OFF, ON Switches the LF/HF bands on/off

HF FREQ 2.50k to 25.0k Hz Center frequency of the HF band

HF GAIN –12.0 to 12.0 dB Gain of the HF band

Parameter Range Description

IN OFF, ON

Turns bypass on/off for the compressor. When bypassed, the button will

be unlit. However even in the bypassed state, the signal will pass through

the input/output transformers and the amp circuit.

FB OFF, ON Switches between feed-forward type and feed-back type.

THRESHOLD –50.0 to 0.0 dB Threshold level

RATIO 1.10 : 1 to 28.9 : 1, LIMIT Compression ratio

ATTACK 20 to 75 ms Attack time

RELEASE 100 ms to 2.50 sec Release time

GAIN –6.0 to 20.0 dB Output level