Reference Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Input channels
Reference Manual
44
Correcting delay between channels (Input Delay)
This section explains how to correct delay between input channels by using Input Delay function.
This function is useful when you want to correct the phase variance, caused by microphone locations
on the stage, to add depth to the sound by using phase variance, or to correct a delay (a gap) that may
exist between video and audio that are sent from a site for broadcast on TV.
1. Use the [SEL] keys on the top panel to select the input channel that will send
signals to the MIX/MATRIX bus.
2. Press a knob in the SELECTED CHANNEL section to access the SELECTED CHANNEL
VIEW screen.
3. Press the INPUT DELAY field to access the INPUT DELAY popup window.
In the INPUT DELAY popup window you can set the on/off status and the value of the input
channel delay. This popup window features three types of view. Use the tabs near the bottom of
the window to select one of four views. Each window view includes the following items.
INPUT DELAY (8ch)
1 DELAY SCALE button
Press the button to display the DELAY SCALE popup window, in which you can select the unit
for the delay time.
You can select one of the four delay scales: meter (meter/sec), feet (feet/sec), sample (number of
samples), and ms (millisecond).
2 Channel select button
Lights to indicate the currently-selected input channel. Press the button to select the channel.
3 Delay setting knob (input channels only)
Indicates the channel delay value. You can use the multifunction knob to adjust it. You can view
the current value immediately above the knob (in unit of ms) and below the knob (in the
currently-selected scale). If ms (millisecond) has been selected for the DELAY SCALE, nothing
will appear above the knob.
INPUT DELAY field
1
2
3