Owner`s manual

Recording Your Performance

CLP-265GP Owner’s Manual

ENGLISH

Changing the Initial Settings (Data recorded at the

beginning of a song)

The initial settings (data recorded at the beginning of a song) can be changed after the recording.

For example, after recording, you can change the voice to create a different ambience or adjust the

song tempo to your taste.

You can change the following initial settings.

Individual Parts

•Voice selection

• [REVERB] depth

• [EFFECT] depth

•Dual mode voices

• Damper/soft pedal depth

Entire Song

•Tempo

• [REVERB] type (including OFF)

• [EFFECT] type (including OFF)

1. Engage Record mode and select a part to change the initial settings.

The indicator glows red. (Data shared by two parts can be changed via either part.)

2. Change the settings via the panel controls.

For example, if you wish to change the recorded voice from [E. PIANO 1] to

[E. PIANO 2], press the [E. PIANO 2] button. When you wish to change the damper/

soft pedal depth, press and hold the pedal.

Be careful not to press the SONG [PLAY/PAUSE] button or a key on the keyboard,

either of which will start recording and erase all previously-recorded data on the

selected part.

3. Press the [REC] button to exit Record mode.

Be careful not to press the SONG [PLAY/PAUSE] button or a key on the keyboard,

either of which will start recording and erase all previously-recorded data on the

selected part.

NOTE

You can cancel changes made

to the initial settings by select-

ing a different part after Step

2, then exiting Record mode by

pressing the [REC] button.

(Changes made to the data

shared by two parts are also

canceled.)