Owner`s manual

Detailed Settings – [FUNCTION]
CLP-265GP Owner’s Manual
ENGLISH
43
You can make detailed adjustments to MIDI
settings.
For more information about MIDI, see the
“About MIDI” section (page 47).
1. Engage the Function mode and select .
2. Press the [+/YES] button to engage the MIDI
function’s sub-mode, then use the [TEMPO/
FUNCTION# ▼, ▲] buttons to select the
desired sub-mode.
Press the [–/NO] or [+/YES] button to set a
selected parameter.
Sub-mode
F7.1: MIDI Transmit Channel Selection
In any MIDI control setup, the MIDI channels of the
transmitting and receiving equipment must be matched
for proper data transfer.
This parameter enables you to specify the channel on
which the Clavinova transmits MIDI data.
Setting range: 1 – 16, OFF (not transmitted)
Normal setting: 1
F7.2: MIDI Receive Channel Selection
In any MIDI control setup, the MIDI channels of the
transmitting and receiving equipment must be matched
for proper data transfer. This parameter enables you to
specify the channel on which the Clavinova receives
MIDI data.
Setting range: ALL, 1&2, 1 – 16
Normal setting: ALL
F7.3: Local Control ON/OFF
“Local Control” refers to the fact that, normally, the
CLP-265GP keyboard controls its internal tone genera-
tor, allowing the internal voices to be played directly
from the keyboard. This situation is “Local Control On,”
since the internal tone generator is controlled locally by
its own keyboard.
Local control can be turned OFF, however, so that the
CLP-265GP keyboard does not play the internal voices,
but the appropriate MIDI information is still transmitted
via the MIDI OUT terminal when notes are played on
the keyboard. At the same time, the internal tone genera-
tor responds to MIDI information received via the MIDI
IN terminal.
Setting range: ON/OFF
Normal setting: ON
F7. MIDI Functions
All MIDI settings described below will affect the MIDI signal
in and out of the USB [TO HOST] connector.
NOTE
In Dual mode, Voice 1 data is transmitted on its specified
channel. In Dual mode, Voice 2 data is transmitted on the
next greater channel number relative to the specified chan-
nel. In either mode, no data is transmitted if the transmit
channel is set to “OFF.”
NOTE
Song data is not transmitted via the MIDI connections. How-
ever, channels 3-16 of non-protected External songs will be
transmitted via the MIDI connections depending on the
Song Channel Selection setting (page 42).
NOTE
ALL:
“Multi-timbre” Receive mode. This allows simultaneous
reception of different parts on all 16 MIDI channels, enabling
the Clavinova to play multi-channel song data received from
a music computer or sequencer.
1&2:
“1&2” Receive mode. This allows simultaneous reception on
channels 1 and 2 only, enabling the Clavinova to play 1 and
2 channel song data received from a music computer or
sequencer.
NOTE
Program change and other like channel messages received
will not affect the CLP-265GP’s panel settings or the notes
you play on the keyboard.
NOTE
No MIDI reception occurs when Demo mode is engaged.