Musical Instrument Owner's Manual

CLP-340/330: Keyboard Stand Assembly

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

ENGLISH

CLP-340/330: Keyboard Stand Assembly

CAUTION

• Assemble the unit on a ﬂat ﬂoor surface.

• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please

assemble the unit in accordance with the sequence given below.

• Assembly should be carried out by at least two persons.

• Be sure to use only the included screws of the speciﬁed sizes. Do not use any other screws. Use of

incorrect screws can cause damage or malfunction of the product.

• Be sure to tighten all screws upon completing assembly of the unit.

•To disassemble the unit, reverse the assembly sequence given below.

Remove all parts from the package and make sure you have all of the items.

Have a Philips-head (+) screwdriver of the appropriate size ready.

Foamed styrol pads

Remove foamed styrol pads from the package, position

them on the ﬂoor, then place A on top of them.

Position the pads so that they will not hide the connectors

on the bottom of A.

A bundled pedal cord is attached to the reverse side.

6 x 25 mm long screws x 4

6 x 16 mm short screws x 4

4 x 12 mm thin screws x 2

4 x 10 mm thin screws x 2

4 x 20 mm tapping

screws x 4

Headphone hanger

Cord holders x 2

Power cord

Assembly Parts