Musical Instrument Owner's Manual

Recording Your Performance

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

ENGLISH

Changing the Initial Settings (Data recorded at the

beginning of a song)

The initial settings (data recorded at the beginning of a song) can be changed after the recording.

For example, after recording, you can change the voice to create a different ambience or adjust the

song tempo to your taste.

You can change the following initial settings.

Individual Parts

•Voice selection

•[VARIATION] ON/OFF (CLP-370/340)

• [REVERB] depth

• [EFFECT] depth

•Dual mode voices

• Split mode voices (CLP-370/340)

• Damper/soft pedal depth

Entire Song

•Tempo

• [REVERB] type (including OFF)

• [EFFECT] type (including OFF)

1. Change the settings via the panel controls.

For example, if you wish to change the recorded voice from [E. PIANO 1] to

[E. PIANO 2], press the [E. PIANO 2] button.

2. Engage Record mode and select a part to change the initial settings.

The indicator glows red. (Data shared by two parts can be changed via either part.)

CAUTION

Be careful not to press the SONG [PLAY/PAUSE] button or a key on the keyboard, either

of which will start recording and erase all previously-recorded data on the selected part.

3. Press the [REC] button to exit Record mode.