Musical Instrument Owner's Manual

Internet Direct Connection (CLP-370/340, CLP-S308/S306)
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
ENGLISH
51
Checking the field strength (when using a USB wireless
LAN adaptor)
You can check the field strength on the display, if you are using a USB wireless LAN
adaptor (Connection example 4 on page 47).
Engage the function mode, then select the function number and enter the desired Sub-
modes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
1. Select Function F9.3 (on the CLP-370/340) or F8.3
(on the CLP-S308/S306).
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.3 (CLP-370/
340) or F8.3 (CLP-S308/S306).
2. Press the [–/NO] or [+/YES] button
The field strength indication will appear on the display for about three seconds.
Field Strength Indications
NOTE
The field strength can be dis-
played after making the Internet
connection.
NOTE
If you are using a wireless game
adaptor, the display pattern for
“No wireless LAN is used” will
appear.
Procedure
Radio Status Display
No signal is present.
Field strength: Weak
Field strength: Medium
Field strength: Strong
No wireless LAN is used.