Musical Instrument Owner's Manual

Internet Direct Connection (CLP-370/340, CLP-S308/S306)
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
ENGLISH
55
Initializing Internet Settings
You can initialize the Internet settings.
Engage the function mode, then select the function number and enter the desired Sub-
modes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
1. Select Function F9.7 (on the CLP-370/340) or F8.7 (on the CLP-
S308/S306).
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.7 (CLP-
370/340) or F8.7 (CLP-S308/S306).
2. Enter the Initializing mode.
Press the [+/YES] buttons.
A “CLr” message will appear on the display.
3. Confirm the initialization.
Press the [+/YES] button.
A “n y” appears in the display to confirm whether you wish to initialize or
not.
If you do not want to initialize, press the [–/NO] button.
4. Execute the initialization.
Press again the [+/YES] buttons.
Start the initialization.
When initialization is completed, an “End” message appears on the display.
5. Return to the Sub-modes Selection mode
Press the [+/YES] button to exit from the Sub-modes.
6. Exit from function mode
Press the [TEMPO/FUNCTION] button to exit from the Function modes.
CAUTION
Initializing restores the instrument to the factory-programmed settings for all Internet
settings. Yamaha recommends you that you back up the Internet settings before initial-
izing.
Internet Initial Settings List
The following are the default settings of this instrument.
NOTE
The settings of the Internet are not
initialized when using the “Initial-
izing the data” on page 58.
Procedure
NOTE
Information of the cookies will be
initialized at the same time.
DHCP ON (available)
Wireless LAN OFF (no settings)
Proxy server OFF (no settings)