Specifications
The
Function
Mode
g F4.3: Right Voice Octave Shift
...........................................................................................
,
.........
.
D F4.4: Left Voice Octave Shift
.........................................................................................................
.
Depending on which voices you combine using the split mode, the combination may sound
better
if
one
of
the voices is shifted up
or
down an octave. Use the [-/NO] and [+/YES]
buttons to set the octave
of
the Left
or
Right Voice as required. The available settings are
"0"
for normal pitch,
"-1"
to shift the pitch down one octave,
and"
1" to shift the pitch up one
octave. Press the
[-/NO] and [+/YES] buttons simultaneously to recall the default setting
(different for each voice combination).
Set according to the pitch extent for the song you want to play.
g F4.S: Right Voice Effect Depth
.....................................................................................................
.
DJ
F4.6: Left Voice Effect Depth
.........................................................................................................
.
These functions make it possible to individually set the depth
of
the effect for the Left and
Right split-mode Voices. Use the
[-/NO] and [+/YES] buttons to set the effect depth for the
corresponding voice
as
required. The depth range is from 0 through 20. A setting
of
"0"
produces no effect, while a setting
of
"20" produces maximum effect depth. Press the
[-INO]
and [+/YES] buttons simultaneously
to
recall the default setting (different for each voice
combination).
~
NOTE
I .
The
effect
depth
settings cannot
be
changed unless
the
EFFECT is
ON.
The
Function
mode
must be
exited before EFFECT
can
be
turned
ON.
D F4.7: Damper Range
...............................................................................................................................
.
The Damper Range function determines whether the damper pedal affects the Right Voice,
the Left Voice, or both the Left and Right Voices in the split mode. Use the
[-/NO] and
[+1
YES] buttons to select
"2"
for the Left Voice,
"1"
for the Right Voice, or "ALL" for both
voices. Press the
[-/NO] and [+/YES] buttons simultaneously to recall the default setting
"ALL".
DJ
F4.8: Reset
........................................................................................................................................................
.
j
This function resets all split-mode functions to their default values. Press the [+/YES]
button to reset the values.
"E
,..,d" will appear on the display when all functions have been
reset.