Specifications
The
Function
Mode
III
CLP-840/820/820S Left Pedal Mode
------
This function sets the left pedal for normal soft-pedal operation, for song start/stop opera-
tion, or for sostenuto (CLP-820S only) operation. Use the [-/NO] and
[+/YES] buttons to
select the desired left-pedal mode.
"1"
is the normal soft-pedal mode, "2" is the start/stop
mode, and
"3"
is the sostenuto mode (CLP-820S only). When the start/stop mode is selected,
the left pedal functions in the same way as the panel [START/STOP] button. Press the
[-/NO]
and [+/YES] buttons simultaneously to recall the default setting
"I".
iii
CLP-880/860 Pedal Functions
--------
After selecting "F 58", press the [+/YES] button to engage the pedal functions sub-mode,
then use the
FUNCTION
[
.....
] and [
....
] buttons to select the desired pedal functions,
as
listed
below.
J
FS.1:
Left
Pedal
Mo'de
...........................................................................................................................
.
This function conveniently lets you set the left pedal for normal soft pedal operation, or for
song startlstop operation. Use the
[-IN
0]
and [+/YES] buttons to select the desired left-
pedal mode. Press the
[-INO]
and [+/YES] buttons simultaneously to recall the default
setting" 1".
1: Soft The left pedal functions as the soft pedal.
2: StarVStop
The left pedal functions
in
the same manner as the [START/STOP] button.
D
FS.2:
Damper
Mode
.................................................................................................................................
..
This function lets you set how the damper pedal affects the sustain sound. There are two
modes for pedal operation.
1:
Switch
In
this mode the pedal acts as a simple on/off switch for sustain.
2: Continuous
In
this mode the pedal continuously changes the amount of sustain (in eight-
step gradations) i.e., the further down you press the pedal the longer the sound
sustains.
Use the
[-/NO]
and [+/YES] buttons to select the desired damper mode. Press the
[-/NO]
and [+/YES] buttons simultaneously to recall the default setting "2".
D
FS.3:
Soundboard Depth
....................................................................................................................
.
Certain piano voices (GRAND PIANO, CLASSICAL PIANO, and JAZZ PIANO) feature
a special effect which recreates the ring
of
the strings and the soundboard resonance
of
an
actual acoustic piano when the damper pedal is pressed. This function lets you adjust the
depth
of
this effect. Use the
[-/NO]
and [+/YES] buttons to set the effect depth
as
required.
The effect depth range is from 0 through 20. A setting
of
"0"
produces no effect, while a
setting
of
"20" produces maximum effect depth. Press the
[-/NO]
and [+/YES] buttons
simultaneously to recall the default setting "12".