Specifications
2
The
Function
Mode
In any MIDI control setup, the MIDI channels
of
the transmitting and receiving equipment must
be
matched for proper data transfer. A "Multi-timbre" receive mode is also available, which allows
simultaneous reception
of
different parts
on
all 16 MIDI channels, allowing the Clavinova
to
play
multi-channel song data received from a music computer
or
sequencer. There's also a "1-2" mode
which allows simultaneous reception
on
channels 1 and
2.
Use the [-INO] and [+/YES] buttons to select the desired transmit
or
receive channel. The
transmit channel parameter can also be turned "OFF"
if
you don't want the Clavinova
to
transmit
any MIDI data.
To
select the multi-timbre receive mode, set the receive channel to "ALL". Select
"1-2" for multi-timbre reception on channels 1 and 2 only.
Press the
[-/NO] and [+/YES] buttons simultaneously to recall the default setting: transmit "1";
receive
= "ALL".
~
NOTE
1
•
In
the
duaf
mode
first voice
data
is
transmitted
on
its
set
channel,
and
in
the
spfit
mode
right
voice
data
is
transmitted
on
its
set channel.
In
the
dual
mode
second
voice
data is transmitted
on
the
next greater channel
number
of
the
set
channel,
and
in
the
split
mode
left
voice
data
is transmitted
on
the
next greater channel
number of
the
set
channel.
In
either
mode,
no
data
is
transmitted
if
the
transmit channel is set
to
"OFF".
• Demo/piano song
data
and recorder playback
data
are not transmitted
via
MIDI.
•
No
MIDI reception occurs
when
the
demo/piano song
mode
is
engaged.
•
Program
change and other
like
channel messages received will not affect
the
Clavinova's panel settings or
what
is baing pfayed
on
the
keyboard.
DJ
F7.3/FS.3: Local Control ON/OFF
..........................................................................................................
.
"Local Control" refers to the fact that, normally, the
Clavinova keyboard controls its internal tone generator,
allowing the internal voices to
be
played directly from
the keyboard. This situation is "Local Control On"
since the internal tone generator is controlled locally by
Clavinova its own keyboard.
Local control can be turned OFF, however, so that the Clavinova keyboard does not play the
internal voices, but the appropriate MIDI information
is
still transmitted via the MIDI OUT connec-
tor when notes are played
on
the keyboard. At the same time, the internal tone generator responds to
MIDI information received via the MIDI IN connector.
When using the DOU-lO Disk Orchestra Unit with the Clavinova, for example, Local Control
should
be
turned OFF when recording using the DOU-lO voices only, and ON when recording the
Clavinova voices while listening to playback
of
the
DOU-I0
voices.
Use the
[-/NO]
and [+/YES] buttons to turn local control
"On"
or
"OFF".
Press the [-!NO] and
[+iYES] buttons simultaneously to recall the default setting "On".
DOU·10
MIOI
IN
DJ
F7.4/FS.4: Program Change ON/OFF
................................................................................................
.
Normally the Clavinova will respond
to
MIDI program change numbers received from an exter-
nal keyboard or other MIDI device, causing the correspondingly numbered voice to be selected on
the corresponding channel (the keyboard voice does not change). The Clavinova will normally also
send a MIDI program change number whenever one
of
its voices is selected, causing the correspond-
ingly numbered voice or program to be selected
on
the external MIDI device
if
the device is set up to
receive and respond to MIDI program change numbers.
This function makes
it
possible to cancel program change number reception and transmission so
that voices can be selected on the Clavinova without affecting the external MIDI device,
Use the
[-/NO] and [+/YES] buttons
to
tum program change transmission and reception "On" or
"OFF",
Press the
[-/NO] and [+iYES] buttons simultaneously
to
recall the default setting "On".