Specifications
r
The
Function
Mode
IdJ
F7.5/FB.5:
Control Change ON/OFF
.......................................................................................
.
I
Normally the Clavinova will respond to MIDI control change data received from an
external MIDI device or keyboard, causing the voice on the corresponding channel to be
affected by pedal and other
"control" settings received from the controlling device (the key-
I
board voice is not affected). The Clavinova also transmits MIDI control change information
when one
of
its pedals or other appropriate controls are operated.
This function makes
it
possible
to
cancel control change data reception and transmission so
that, for example, the Clavinova pedals and other controls can be operated without affecting
an external MIDI device.
Use the
[-/NO]
and [+/YES] buttons to tum control change transmission and reception
"On"
or "OFF".
Press the
[-iNO]
and [+/YES] buttons simultaneously to recall the default setting "On".
tlil
NOTE
1 •
For
information on control changes that can
be
used with the Clavinova, refer to the MIDI Data
Format on page 43.
D
F7.6/FB.6:
MIDI
Transmit Transpose
......................................................................................
.
This function allows the MIDI note data transmitted by the Clavinova to be transposed up
or
down in semitone increments by up to plus or minus 12 semitones. The pitch
of
the
Clavinova itself is not affected.
Use the
[-/NO]
and [+/YES] buttons to set the desired amount
of
MIDI transmit transposi-
tion. The range is from
"-12"
(down one octave) through
"0"
(no transposition) to "12" (up
one octave).
Press the
[-!NO]
and [+/YES] buttons simultaneously
to
recall the default setting "0".
D
F7.7/FB.7:
Panel/Status Transmit
.............................................................................................
..
This function causes all the current Clavinova panel settings (selected voice, etc.) to be
transmitted via the MIDI OUT terminal. This is particularly useful
if
you will be recording
performances to a MIDI sequence recorder such as the Yamaha MIDI Data Filer MDF3 which
. will be used to control the Clavinova on playback. By transmitting the Clavinova panel set-
tings and recording them on the MIDI sequence recorder prior to the actual performance data,
the Clavinova will be automatically restored to the same settings when the performance is
played back.
Press the
[+/YES] button
to
transmit the panel/status data.
"E
Ii
d"
will appear on the LED
display when the data has been successfully transmitted.
tlil
NOTE
1 • See page 44 for list
of
the "Panel Data Contents" transmitted
by
this function.
• Panel setting data that is transmitted
to
an external device can only be reloaded on a model
of
the
same type. Panel setting data can also be directly transferred to
or
from instruments
of
the same
model type.
IdJ
F7.B/FB.B:
Bulk
Data
Dump
.............................................................................................................
..
This function is used to transmit all data stored in the Recorder memory to a MIDI data
storage device such
as
the Yamaha MIDI Data Filer MDF3, other sequence recorders, or MIDI
compatible computers.
Press the [+/YES] button
to
begin bulk transmission.
nd"
will appear on the LED
display when the data has been successfully transmitted.
tlil
NOTE
1 • Bulk data dump will not function when the recorder is in operation.
• Recorder data that is transmitted
to
an extemal device can only be reloaded on a model
of
the same
type. Recorder data can also be directly transferred
to
or from instruments
of
the same model
type.
• The reload operation cannot be executed when thp. Rp.,.,nrrl",r
i"
in
nn"'r~tir""
nr
,
...
~
c.
on~"~_
---'-
:-