Specifications
The
Function
Mode
1m
Ii
so
CLP-840/820/820S Backup Functions
_____
_
CLP-880/860 Backup Functions
_______
_
After selecting "F
8.':1"
or
"F
9.':/",
press the [+/YES] button to engage the backup function
sub-mode, then use the
FUNCTION [ ... ]
and
[
....
] buttons to select the desired backup func-
tion,
as
listed below.
I!l]
NOTE
1 • The backup settings themselves,
and
the contents
of
the recorder memory, are always backed up .
• Even
if
the Backup is turned on, factory presets can
be
recalled
at
any time (see
page
40). The
factory setting list
is found on page 42.
Even
if
backup is turned
on
via one
of
the functions described below, the data will only be
retained in memory for about 1 week
if
the power is not turned on during this time.
If
the
backup period is exceeded, all settings will be reset to their default values.
If
you want to
retain the backup settings for longer periods,
be
sure to turn the power switch on for a few
minutes at least once a week.
D FS.1/F9.1: Voice
............................................................................................................................................
.
Turns backup
of
the voice functions listed below
on
or
off. Use the [-!NO] and [+/YES]
buttons to turn backup
"On"
or "OFF".
The default backup mode is "OFF".
• Voice (Keyboard, Dual, and Split)
• Dual (ON/OFF, Voice, and Dual Functions for each voice combination)
• Split (ON/OFF, Voice, and Split Functions for each voice combination: CLP-880/860)
• Reverb (ON/OFF, Type, and Depth for each voice)
• Effect (ON/OFF, Type, and Depth for each
voice:
CLP-880/860/840)
• Variation (for each voice)
• Touch Sensitivity (including the FIXED volume)
• Metronome (Beat, Volume)
• Piano Song Part Cancel Volume
D FS.2/F9.2:
MIDI
...............................................................................................................................................
.
Turns backup
of
the MIDI functions listed below on or off. Use the [-/NO] and [+/YES]
buttons to turn backup
"On"
or "OFF".
The default backup mode is "OFF".
• Channel (Transmit, Receive)
• Local ON/OFF
• Program Change ON/OFF • Control Change ON/OFF
• MIDI
Transmi~
Transpose
IdJ
FS.3/F9.3: Tuning
........................................................................................................................................
.
Turns backup
of
the tuning functions listed below on or off. Use the [-/NO] and [+/YES]
buttons to turn backup "On" or "OFF".
The default backup mode is "OFF".
• Transpose • Tuning • Scale (including base note)
D FS.4/F9.4: Pedal
..........................................................................................................................................
..
Turns backup
of
the pedal functions listed below on or off. Use the
[-/NO]
and [+/YES]
buttons to turn backup
"On"
or "OFF".
The default backup mode is "OFF".