Specifications

Factory
Preset
Recall
.All
dual mode, split mode, reverb, effect, touch sensitivity, tuning
settings, and the settings affected by the Backup Functions can
be
restored to their original factory preset values by holding the C7 key
(rightmost key on the keyboard) while turning the
[POWER]
switch
ON. This also erases all recorder data, and sets all Backup on/off
settings (F8: CLP-840/820/820S, F9: CLP-880/860)
to
"OFF".
~
NOTE
I . The factory setting list
is
found on page 42.
Troubleshooting
If
you
encounter what appears
to
be
a malfunction, please check the following points before assuming
that your Clavinova
is
faulty.
1. No Sound When the Power is Turned
ON
4.
Intermittent Static Noise
Is the AC plug properly connected to the Clavinova
This is usually due to turning ON or OFF a house-
and an
AC
wall outlet? Check the AC connection
hold appliance
or
other electronic equipment which
carefully. Is the MASTER VOLUME control turned is fed by the same AC mains line as your Clavinova.
up to a reasonable listening level?
5.
Interference Appears On Radio
or
TV Sets
Also make sure that a pair
of
headphones is not
Located Near the Clavinova
plugged into the PHONES jack, and that the Local
The Clavinova contains digital circuitry which can
Control (page 35) is ON.
generate radio-frequency noise. The solution is to
2.
The Damper Pedal Doesn't Work
move the Clavin ova further away from the affected
If
the damper pedal doesn't work,
or
notes are
equipment,
or
vice versa.
sustained even when the pedal is not pressed, make
6.
Distorted Sound When the Clavinova is
sure that the pedal cord is properly plugged into the
Connected
to
An
External Amplifier/Speaker
main unit (page 66:
CLP-820S, page 60: CLP-860/
System
840/820, page 52: CLP-880).
If
the Clavinova is connected to a stereo system
or
3.
The Clavinova Reproduces Radio
or
TV
instrument amplifier and the sound is distorted,
Sound
reduce the volume
of
the external equipment to a
!
This can occur
if
there is a high-power transmitter in
level at which the distortion ceases.
Ii
a
your vicinity. Contact your Yamaha dealer.
I
If "Sc
n"
appears on the display an internal malfunction has occurred. In
this
case, contact
your
Yamaha dealer .
. I
I
I
Opl'ions
&
Expander
Modules
Options
Expander Modules
BC-8 Bench
DOU-10 Disk Orchestra Unit
A comfortable bench styled to match your Yamaha
A range
of
MIDI recording and playback func-
Clavinova.
tions, plus Yamaha DOC software, Disklavier
HPE-160 Stereo Headphones
PianoSoft™, and General MIDI/Standard MIDI File
High-performance lightweight dynamic headphones
disk playback
capabilit~.
with extra-soft ear pads.
KC-883 Key Cover (for the
ClP-820S
only)
A
c-onvp,nip.nt
Wl'lV
tCl
Ie",,,,,,,
VClllr
lepvhCl"rn
rjp<>n
Clnrl