User Manual

DANTE ACCELERATOR Driver Installation Guide
4
Windows
Select the buffer size in the control panel of the driver.
How to Open the Control Panel
From the Nuendo menu, select [Devices]  [Device Setup...]
 [Yamaha AIC128-D]  [Control Panel]
Panel Controls
1 ASIO Buffer Size
Select the buffer size for the ASIO driver.
Setting value: 32 to 2048 samples
2 DMA Transaction Size
Select the buffer size for the card.
Setting value: 16, 32 samples
Mac
Select the buffer size in the buffer size selecting window, which is opened from an application such as DAW software.
How to Open the Control Panel
From the Nuendo menu, select [Devices]  [Device Setup...]
 [Yamaha AIC128-D]  [Control Panel]
Selecting the General Settings (Buffer Size)
1
2
TIP
Setting the audio driver buffer size
Noise produced when using audio applications such as DAW software may affect audio recording and/or playback. In most cases,
you can solve these problems by adjusting the audio driver buffer size (the size of memory used to temporarily hold data to avoid
intermittent playback).
While the higher buffer size reduces load to the computer CPU but produces latency (time lag) during recording/playback, the
smaller buffer size may result in noise or the sound cutting off. Make sure to set the buffer size to an appropriate value depending on
the performance of your computer, the number of audio/MIDI tracks being recorded/played back on the DAW software, the number
of plug-in software, and so on.