User Manual

NUAGE Firmware Update Guide 4
■ Update procedure sequence
Update each firmware component in the following sequence.
If you plan to update multiple NUAGE series units, repeat the procedure described in “Update” for each unit in
sequence.
Updating the NUAGE series firmware
TCP/IP settings of computer
Install the Dante Firmware Update Manager
Updating the Dante firmware
The firmware update is completed
● Refer to the section “Nuage Compatibility” at the Yamaha Pro Audio site (below) for details Dante firmware
update requirements.
http://www.yamahaproaudio.com/downloads/
When updating Nuage I/O
and Dante firmware needs
to be updated:
When updating Nuage Fader
or Nuage Master, or
when
updating Nuage I/O and
updating
Dante firmware is
unnecessary
: