User Manual

Description of the Software Programs
NUAGE MASTER Operation Manual 30
• [VOLUME] (JOG WHEEL section)
• [CYCLE] (TRANSPORT section)
•[] (record) (TRANSPORT section)
• [TALK BACK] (COMMUNICATION section)
When you set this to off, lighting of the buttons while they
are held is disabled.
$ SPL dB
Sets “SPL dB.” By adjusting the value using the [Multi
function knob] and then pressing [Multi function button A]
(SET), you can set the value.
TRACK LIST Page
Overview
This page is for operating the Select, Mute, Solo/Listen,
and Record Enable functions for the tracks. To open this
page, press [TRACK LIST] (page 24) in the MULTI
FUNCTION DISPLAY section.
The TRACK LIST page has the following views.
• Track Select view (page 31)
• Mute view (page 31)
• Solo view (page 32)
• Track Arming view (page 32)
To select the view, touch the corresponding tabs at the
middle of the Tool area, or touch the buttons in the Label
Pane area, or press the [Multi function knob].
The tabs at the middle of the Tool area:
The buttons in the Label Pane area:
To scroll through the view of the Main area, touch “u”/“d”
on the Tool area.
The TRACK LIST page has the following three display
styles.
• Overview display
• Stratum display
• Track display
To select the display style, touch the buttons at the left
side of the Tool area.
Overview Display
The Overview display shows up to twelve blocks, each of
which represent a group of thirty-two different tracks.
When you touch a block, the tracks in the block are shown
in the Track display. Please note that in the Overview
display, you cannot operate the Select, Mute, Solo/Listen,
and Record Enable functions for the tracks.
Stratum Display
The Stratum display shows up to thirty-two tracks and
folder tracks contained in the selected stratum.