User Manual

Added functions in NUAGE V1.7 74
Support for GPIO (Nuage
Master)
You can now receive GPIO input in Nuage Master or
output GPIO signals from Nuage Master via JL Cooper
eBOX/eBOX GPI8.
NOTE
• Nuage Master plays the role as an eBOX client, so set all eBOX
devices that communicate with Nuage Master to server mode.
• To ensure proper communication, turn off the eBOX password
function.
Connection example
Operation
1. From the Nuendo or Cubase menu, click
“Devices,” then “NUAGE MASTER Setup.”
2. Click the “GPIO” tab.
3. Perform the settings on each of the following
pages.
Device page
Enables you to set whether to turn the GPIO function on or
off, and perform basic settings for using the GPIO
function.
1 On/Off
Turns the GPIO function of Nuage Master and eBOX
on (lit) or off (not lit).
2 Model
Enables you to select the type of eBOX connected to
the GPIO device. You can connect up to four eBOX or
eBOX GPI8 devices.
3 IP Address
Enables you to input the Nuage Master and eBOX IP
addresses. Set the separate IP addresses for Nuage
Master and each of the eBOX devices.
Example:
eBox
eBox eBox eBox
Network switch
GPIO device
GPIO device GPIO device GPIO device
Nuage Master 192.168.254.103
eBOX1 192.168.254.102
eBOX2 192.168.254.104
1 2 3