User Manual

Added functions in NUAGE V1.7 83
Initializing Direct Monitoring
Settings (Nuage I/O)
You can now initialize the settings for direct monitoring in
Nuage I/O.
Operation
Numbers in the screen shot below correspond to the instruction
steps.
1. From the Nuendo or Cubase menu, click
“Devices,” then “NUAGE I/O Setup.”
2. Click the “Direct Monitoring” tab.
3. Click “Reset.”
The direct monitoring settings are initialized, and the
buses are automatically set using the following
priorities.
Priority 1 Control Room bus
Priority 2 Output bus