User Manual

Description of the Software Programs

NUAGE I/O (16D) / NUAGE I/O (16A) / NUAGE I/O (8A8D) Operation Manual 19

NUAGE Workgroup Manager

Overview

This is a software application that allows control over the

devices and DAW software applications as a Workgroup

on NUAGE system. To open this window, double-click the

NUAGE Workgroup Manager icon on the task tray

(Windows) or menu bar (Mac).

This section provides only the descriptions regarding the

device settings on the NUAGE Workgroup Manager. For

details on the NUAGE Workgroup Manager, refer to the

corresponding manual (PDF) which can be opened from

the “Manual” icon.

You can configure the following device settings in the

NUAGE Workgroup Manager. However, the setting menu

will differ depending on the particular devices being used.

• Adjusting the trim of the analog input and output

signals.

• Selecting the level of the analog input signal.

• Selecting the word clock source.

• Turning the SRC (sample rate converter) of the digital

input signal on and off.

• Turning the dual wire on and off.

To configure these settings, use the “Property Window”

opened by clicking “Property” on the Workgroup area in

the Main window.

Controls and Functions

NUAGE I/O (16D)