manual

110 CLP-280/270 Owner’s Manual
Appendix
CLP-280/270: Keyboard Stand Assembly
2. Attach B.
2-1 Insert B between E and F as shown in the illus-
tration.
2-2 Align and attach B to the front side of D, E and
F.
2-3 Secure B using the 4 x 14mm thin screws.
* Insert two screws into the smaller holes on the
brackets.
2-4 Te mporarily secure with 4 x 14mm thin screws.
* Insert four screws into the smaller holes on the
brackets.
2-5 If you assembled the stand on an unlevel sur-
face, place the assemble stand on a level sur-
face.
3. Mount A.
3-1 Assemble the side panel protection (card-
board) pad, as shown in the illustration. Then,
remove the two backing papers from the adhe-
sive tape on the protection pad.
3-2 Cover the top of E and F with the side panel
protection pad. Then, fix the protection pad
with the adhesive tape.
2-3
2-4