Operation Manual

46
Advanced Functions
Connections
NOTICE
When the Clavinova’s AUX OUT jacks are connected to an external audio system, first turn on
the power to the Clavinova, then to the external audio system. Reverse this order when you turn
the power off.
The sound condition output from the internal speakers and the headphones
changes automatically to the appropriate settings depending on how the external
device is connected to the AUX OUT jacks (see chart below).
* The output level of the headphones and AUX OUT is lowered.
5 AUX IN [L/L+R][R] jacks
The stereo outputs from another instrument can be connected to these
jacks, allowing the sound of an external instrument to be reproduced via
the Clavinova’s speakers. Refer to the diagram below and use audio cables
to make the connections.
NOTICE
When the Clavinova’s AUX IN jacks are connected to an external device, first turn on the power
to the external device, then to the Clavinova. Reverse this order when you turn the power off.
NOTE
Use cables and plugs with no
resistance.
NOTE
Do not route the output from the
[AUX OUT] jacks to the [AUX IN]
jacks. If you make this
connection, the signal input at the
[AUX IN] jacks is output from the
[AUX OUT] jacks. These
connections could result in a
feedback loop that will make
normal performance impossible,
and may even damage both
pieces of equipment.
NOTE
If you want to take a mono signal
via the AUX OUT jack, connect a
cable to the [L/L+R] jack.
L/L+R
R
AUX OUT
Clavinova Powered speaker
AUX OUT AUX IN
Phone plug
(standard)
Phone plug
(standard)
Cable
Sound output condition from the instrument
Speakers sound
Speakers do not sound
No plugs to connected to AUX OUT jacks Plugs connected to AUX OUT jacks
SPEAKER: ON
SPEAKER:
NORMAL
SPEAKER: OFF SPEAKER: ON
SPEAKER:
NORMAL
SPEAKER: OFF
Headphones
connected
Optimum
equalization for
speakers applied*
Flat Flat Flat* Flat Flat
Headphones
not connected
Optimum
equalization for
speakers applied
Optimum
equalization for
speakers applied
Flat Flat* Flat* Flat
NOTE
The Clavinova’s [MASTER
VOLUME] slider setting affects
the input signal from the AUX IN
jacks, but the [BRILLIANCE],
[REVERB], and [EFFECT] settings
do not.
NOTE
If you connect the Clavinova to a
monaural device, use only the
AUX IN [L/L+R] jack.
AUX IN
AUX OUT
AUX IN
OUTPUT
Clavinova
Phone plug
(standard)
Phone plug
(standard)
Tone
Generator
Phone plug
(standard)
Cable
Cable
Tone
Generator
Stereo phone plug
(standard)