Operation Manual

15
Introduction
Getting Started — Playing the Clavinova as a Piano
Connect a pair of headphones to one of the [PHONES] jacks.
When the headphones are plugged into either of the [PHONES]
jacks, the internal speaker system is automatically shut off. Two
[PHONES] jacks are provided. Two sets of standard stereo
headphones can be plugged in. (If you are using only one pair of
headphones, you can plug them into either of these jacks.)
CAUTION
Do not use headphones at a high volume for an extended period of time.
Doing so may cause hearing loss.
Optional headphones
HPE-160 Yamaha headphones
Using the headphone hanger
You can hang the headphones on the instrument. Install the headphone hanger
using included two screws (4 × 10mm) as shown in the illustration.
NOTICE
Do not hang anything other than the headphones on the hanger. Otherwise, the instrument or the hanger
may be damaged.
This special speaker system, located on the rear side, effectively reproduces the reverberation
and spaciousness of the sound of the soundboard on an actual grand piano.
Press the [S. BOARD SPEAKER] button to turn the function on and off.
When it is on, the lamp lights.
You can also set the depth of GP Soundboard Speaker. For details, refer to “Detailed settings for acoustic effects”
on page 67.
Using headphones
Realistic soundboard effects — [S. BOARD SPEAKER]
To ensure optimum performance of the GP Soundboard Speaker function, place the instrument so that the rear
side of the instrument is 1– 2 cm away from the wall.
Bottom surface
Standard stereo
phone plug