Operation Manual

59
Detailed Settings
Detailed settings for recording and playback — [FILE/SONG SETTING]
This parameter enables you to specify whether a Song
that starts from the middle of a bar, or a Song with a
silence prior to the first note, should be played from the
first note or from the top of the bar (rest or blank).
Setting range:
•On
Playing from the first note
•Off
Playing from the top of the bar (including a rest or blank)
Default setting:
On
You can select a single channel to listen to its contents.
Playback starts from the first note.
Setting range:
Ch1 – Ch16
Default setting:
Ch1
NOTE
The Song data consists of 16 channels. A channel is assigned to a
part, so in this instrument, channel means the same as part.
NOTE
Even channels that contain no data are displayed.
You can delete data from each of the 16 channels.
Setting range:
Ch1 – Ch16, ALL (all channels)
Default setting:
Ch1
NOTE
The Song data consists of 16 channels. A channel is assigned to a
part, so in this instrument, channel means the same as part.
NOTE
Even channels that contain no data are displayed.
NOTE
When you clear all channels using the “ALL” parameter, you can
overwrite the Song. In this case, the file which contains Song
settings with no channel data is saved.
Specifying whether playback starts
immediately along with the first
voicing*
QuickPlay
Auditioning the channels*
ChannelListen
QuickPlay
On
Select On/Off
ChannelListen Start?
_
>
Ch1
Playback continues as long as you press
and hold down this button.
Select the desired channel for playback.
Deleting data from each channel*
ChannelClear
For information on the settings “RecStart” and
“RecEnd,” see “Re-recording a Song partially” on page
37.
For information on the setting “RecExtraPartsCh,” see
“Multi Recording of specific Parts” on page 36.
ChannelClear Execute?
_
>
Ch1
Select the desired channel for deletion.
Delete data.